FREE TRACKED & INSURED SHIPPING ON ALL ORDERS OVER £100 FOR A LIMITED TIME

Driptips & Atomiser Spares

**NEW* Bronze Pyrex tips (ultra high quality)
High light transmission shock treated Pyrex (like Gorilla glass) driptips available in Shorty & Mega sizes
Flame finished for a 'smooth as silk' luxury feel - finish resists 'crud' buildup
Stays cool even under extreme vaping condions
Set into a phosphor bronze collar (>90% copper) with medical grade adhesive (approved for use in surgical instruments)
Colour changes with the light - under bright light looks like rose gold, indoors more like red copper - really stunning
Standard 510 fitting - Available in 2 lengths - 'Shorty' 16mm / 'Mega' 25mm
Bore size is 5.6mm straight through (no step) - perfect for dripping or normal vaping use
** all driptips include multiple sets of o-rings for maximum compatability with different 510 fittings **
 
High light transmission shock treated Pyrex (like Gorilla glass) driptips available in Shorty & Mega sizes
Flame finished for a 'smooth as silk' luxury feel - finish resists 'crud' buildup
Stays cool even under extreme vaping condions
Set into a stainless steel collar with medical grade adhesive (approved for use in surgical instruments)
Standard 510 fitting - Available in 2 lengths - 'Shorty' 16mm / 'Mega' 25mm
Bore size is 5.6mm straight through (no step) - perfect for dripping or normal vaping use
** all driptips include multiple sets of o-rings for maximum compatability with different 510 fittings **
Our toughened pyrex tips are extremely resilient, but are not 'unbreakable' - please take care with any glass product
Limited Edition Brass Tips (ultra high quality)
I have a small run of brass tips available - 2 different sets available
Set 1 - 2x our most popular shorty pyrex (with brass collar) plus 1x new rocket tip (in full brass)
Set 2 - 2x the new rocket tip (in full brass)
These will be added to the site & available from 8pm Friday 18th October
Once they sell out, I will not be able to make more for quite a while!
** Maximum of 4 sets per person **
NEW Stainless Steel Ultra Shorty Tips (MULTIBORE)
Stainless steel ultra shorty 12mm driptips - available with 3 different bore sizes to allow real changes to the vape.
11mm width, 12mm length - these are great minimalist tips crafted from the best materials.
Premium feel - lathe cut & hand finished - real quality.
 
Available in 8mm (ultra widebore) - 4.5mm (medium bore) - 3mm (narrow bore)
Tips sold individualy, or as a set of all 3 at a reduced price
 
Stainless Steel Shorty Rocket Tips (MULTIBORE)
Stainless steel Rocket style driptips - available with 3 different bore sizes to allow real changes to the vape.
Premium feel - lathe cut & hand finished - real quality.
 
The bore size of the driptip has an effect similar to altering the airhole size on an atomiser - now you can customise
the draw of your atomiser as easily as switching the driptip!
 
Rocket tips are 15mm in length (excluding 510 connector) - shorty style - fine brushed finish
 
Available in 6mm (widebore) - 4.5mm (medium bore) - 3mm (narrow bore)
Tips sold individualy, or as a set of all 3 at a reduced price
 
Stainless steel ultra widebore driptips - with MAXIMUM FLOW. Premium quality tips - you will be impressed!
Lathe cut & worked by hand in the uk - produced from solid stainless steel bars.
'Full fat boy' 11mm diameter. Short & fat. 8.6mm hole tapers to 6mm
'Fat boy slim' 11mm diameter. Short & fat. 6mm hole straight through
Standard 510 fitting - these are the widest possible bore size for a driptip & the widest available worldwide.
Available in 2 lengths - 'Shorty' 15mm / 'Mega' 25mm
** UPDATE Now includes multiple sets of o-rings for maximum compatability with different 510 fittings **
Price includes 1x 'Full fat boy' + 1x 'Fat boy slim' = 2 tips per pack
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

New RSM Hybrid is currently sold out

Next Hybrid units will be 18500 & will be available on 8th August 2014 at 8pm UK time

 

Driptips & spare parts are available & in stock

 

Reservations for Doodlebug atomisers are closed (no longer available)

 

Reservations for Rocket atomisers are closed (no longer available)

 
Availability
 
Our atomisers are hand produced from the highest quality raw materials - as such they take a while to hand craft
and there is often a long waiting time.
Starting from the Special Edition atomisers, we are planning to reduce this wait time to a maximum of 8 weeks,
although our low production facilities will mean that it will continue to be a challenge to meet the demand.
 
Please do not email us to be added to a list - the atomisers will be announced at regular intervals & available
from this website at the times / dates stated.
The next atomisers to be available will be shown at the top of this page as well as announced on various forums.
Shipping Details
 
Within the UK - delivery via Royal Mail Special Delivery (next day service) - P&P £7.00
Rest of World* - delivery via Royal Mail Airsure Tracked service (5-7 days service) - P&P £15.00
Rest of World* - delivery by International Signed For service (6-9 days service) - P&P £15.00
 
*International shipping locations - I can ship most packages wordwide
Packages that contain an atomiser will not be shipped to destinations where ecig related products are prohibited
Airsure expedited service will be used where available, to destinations not served by Airsure, International Signed For service will be used
 

RSM Hybrid

 
 
 
Designed to follow a natural evolution of our previous atomiser ranges, we are thrilled to present our latest product - the RSM Hybrid
 
The RSM Hybrid - initially available with genesis atomiser head (dripper head will follow in September)
Initially available in 18350 mode, size is 92mm to the top of the topcap (roughly the same as a provari mini without an atomiser attached)
Cut from solid stainless steel stock, fetaures a a bronze ultra low pressure double piston switch for feather light / smooth operation (0.5mm throw)
The threading on the RSM Hybrid is standard m20x1 (for switch & atomiser sections)
 
The RSM Hybrid is a great wicking device & is designed to run with a sealed deck (all holes plugged)
This makes it significantly less prone to flooding / excess juice issues
 
The chamber design of the topcap is a double step reduced chamber, with an effective chamber size of 14mm x 5mm (circular)
This gives a vape similar to the more intense 16mm sized atties, but with the aesthetics & juice capacity of a 22mm unit
 
Tank capacity is 2.3ml, can run as single or U wick setup.
 
All insulators on the new hybrid are cut from high spec PEEK which is much more resistant to melting from high power vaping setups.
 
Shown above with our new 'Nano tip' which is 9mm in length / ultra widebore (will be available when the Hybrid is launched on 30th May)
 
18500 tubes & a dripper head will be available August / September, both seperateley & as complete hybrid units
 
Spare topcaps can be ordered with any airhole size - please email me with the size you would like (or add a note when paying)
 
RSM HYBRIDS ARE HAND PRODUCED BESPOKE PRODUCTS - THEY ARE MADE TO YOUR ORDER
DELIVERY IS TYPICALLY 4 WEEKS FROM ORDER
 
FREE TRACKED & INSURED SHIPPING ON ALL ORDERS OVER £100 FOR A LIMITED TIME
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Rocket Atomiser

 
 
Width 22mm / Height 37mm / Weight 58g
Materials composition: body - fine brushed finish unibody bobbin tank / SS bolts (Stainless steel)
Materials composition: topcap - fine brushed finish microchamber vortex (Stainless steel) double stripe design
Materials composition: tank - borosilicate fused glass (Pyrex)
Materials composition: insulators - black delrin
Tank volume - 2.1ml (actual)
Air inlet in topcap - 1.2mm diameter
Screw holes in topcap are 3mm threaded, wick holes are 3mm smoothbored
 
 
The rocket atty comes with the standard topcap which has the tiny chamber similar in style to the doodlebug SE atomiser for single wick use
2 optional topcaps are available to enable multi wick / U wicks, with hole configurations as shown above
Default airhole sizes are 1.2mm on single airhole caps / 1mm on double airhole caps - but you can specify any size & we will make it to your spec
 
As well as the atomiser, on launch day there will be matching items available for the rocket atomiser:
Rocket atomiser - £129
Stainless steel tank section (replaces the pyrex) - £14
Optional topcaps (as shown above) - £40
Full rebuild kit (contains every spare part for the rocket - including pyrex tank) - £25
Spare pyrex tanks - £10
New 'Rocket Tips' ultra widebore premium tip in stainless steel (as shown above) - £9.50
 
ROCKET ATOMISERS ARE HAND MADE BESPOKE PRODUCTS - THEY ARE MADE TO YOUR ORDER
DELIVERY OF ATOMISERS ORDERED ON 4/8/2014 WILL BE WITHIN 3 DAYS
*** LIMIT OF 1 ATOMISER PER PERSON ***
 
FREE TRACKED & INSURED SHIPPING ON ALL ORDERS OVER £100 FOR A LIMITED TIME
THIS OFFER IS VALID FOR ANY ORDER THAT CONTAINS AN ATOMISER
 
 
 
 
 
 
 
 
 
 
 
 
     
         

Special Edition Doodlebug

 
Width 22mm / Height 49mm / Weight 83g
Materials composition: body - fine brushed finish unibody bobbin tank / SS bolts (Stainless steel)
Materials composition: topcap - fine brushed finish microchamber vortex (Stainless steel) triple stripe design
Materials composition: tank - borosilicate fused glass (Pyrex)
Materials composition: insulators - black delrin
Tank volume - 2.8ml (actual)
Air inlet in topcap - 1mm diameter
Screw holes in topcap are 3mm threaded, wick hole is 3mm smoothbored
 
 
The 'Special Edition Doodlebug' is the last refinement of the Doodlebug, a highly focussed genesis style atomiser,
hand crafted in the finest materials, designed & built in the UK.
 
The special edition benefits from all the advances in machining & experience that we have learnt whilst making the Doodlebug
and is without a doubt the highest quality atomiser that we have ever been able to make.
 
A luxurious new fine brushed finish, triple stripe design on the topcap, upgraded plastic insulators
 
Extra time is taken at the finishing stage to ensure that each 'Special Edition Doodlebug' truly deserves the 'Special Ediiton' tag.
 
DELIVERY OF ATOMISERS ORDERED ON 5/8/2014 WILL BE WITHIN 3 DAYS
*** LIMIT OF 1 ATOMISER PER PERSON ***
 
FREE TRACKED & INSURED SHIPPING ON ALL ORDERS OVER £100 FOR A LIMITED TIME
THIS OFFER IS VALID FOR ANY ORDER THAT CONTAINS AN ATOMISER
 
 
 
 
 
 
 
 
   
 

Reseller / Wholesale Information

 
We are accepting approaches from resellers with 'Bricks & Mortar' vaping outlets worldwide to carry our
exclusive range of hand crafted products.
 
Interested parties should email me in the first instance rocket@rocketsciencemods.com for full details
 
Thanks - Matt

Reviews

 

Contact Details

 
For any general enquiries or support, please email your question to rocket@rocketsciencemods.com
If your email is in reference to an atomiser bought from us, please ensure to state the serial number engraved on the bottom of the atomiser
to enable us to answer your question as specifically as possible.
All emails will be responded to within 1 working day.
 
Please only send 1 email or message & be aware that we do not have internet access at the workshop
Sending the same message multiple times to several email accounts & also the facebook page just makes the hundreds of emails
that I receive every day take even longer to deal with & adds to the delay in responding.
So it is unlikely that you will receive a response within 5 minutes of sending a question, but you will get a reply within 1 day or so.
 
Our updates for status etc are now dealt with on our Facebook page (link below)
Rocket Science Mods

Promote Your Page Too */ -->